Discus water parameters for beginners (simple version)
Discus water parameters for beginners — a simple table with just 4 key values (temperature, pH, ammonia, nitrite). No TDS, KH, GH or other advanced technicalities.

Quick summary
- Only 4 parameters matter now: temperature, pH, ammonia, nitrite.
- Temperature: 29°C (84°F), held steady (±0.5°C / ~1°F) — the single most important value.
- pH: 6.5–7.5 — most treated municipal tap water is fine for commercially bred discus.
- Ammonia: 0 ppm AND Nitrite: 0 ppm — mandatory, no exceptions.
- Test weekly with a liquid API master kit (not paper strips).
- Stability matters more than hitting exact values.
In Brief
- Only 4 parameters matter right now: temperature, pH, ammonia, nitrite.
- Temperature: 29°C (constant, ±0.5°C) — the single most important value.
- pH: 6.5–7.5 — Romanian tap water is fine for farm-bred discus.
- Ammonia: 0 ppm and Nitrite: 0 ppm — mandatory, no exceptions.
- Test weekly with an API Master Kit (~€47).
- Stability matters more than hitting exact values.
The 4 Essential Values
| Parameter | Target value | How to measure | Why it matters |
|---|---|---|---|
| 🌡️ Temperature | 29°C (28–30°C) | Digital thermometer | Immunity, metabolism |
| 🧪 pH | 6.5–7.5 | API liquid test | Physiological comfort |
| ☠️ Ammonia (NH₃) | 0 ppm | API liquid test | Toxic — lethal above 0.5 ppm |
| ☠️ Nitrite (NO₂) | 0 ppm | API liquid test | Toxic — lethal above 0.5 ppm |
💡 Ignore for now: TDS, KH, GH, nitrate (under 40 is fine), CO2, dissolved oxygen. Study these after your first 3 months. For advanced detail see Ideal Water Parameters.
How to Test Your Water
Equipment Needed
| Product | Price (EUR) | Lasts |
|---|---|---|
| API Freshwater Master Test Kit ⭐ | €37–52 | 250+ tests |
| Digital thermometer | €6–15 | Years |
Total: ~€47–65 for a year of testing.
❌ DO NOT use paper test strips ("5-in-1 tests") — the margin of error is too large. Use liquid drop tests only.
Testing Frequency
| Stage | How often |
|---|---|
| Tank cycling (4–6 weeks) | Daily |
| First 4 weeks after stocking | Every 2 days |
| Established tank | Weekly |
| Visible problem (sick fish) | Immediately |
What to Do When a Value Is Wrong
Temperature Not at 29°C
| Situation | Solution |
|---|---|
| Below 28°C | Check the heater (faulty?) — add a second heater |
| Above 30°C (summer) | Air stone + a room fan aimed at the tank surface |
| Large swings day/night | Cover the tank, move it away from draughts |
pH Too High (>7.5) or Too Low (<6.0)
Romanian tap water typically has a pH of 7.0–7.8 — perfectly suitable for farm-bred discus (Stendker).
The first 30 days with discus calendar
One day per row: what to do, what to check and what to avoid in the first month. No theory, just the right order.
- pH high (>7.8): add a catappa leaf — it naturally brings pH down to 7.0–7.2.
- pH low (<6.0): rare with tap water — double-check the test, likely a testing error.
- Large swings day/night: KH is too low — you'll look into this later.
💡 DO NOT use chemical "pH down/up" products — they destabilise the water and can kill your fish.
Ammonia or Nitrite Above 0 — EMERGENCY
Immediate steps:
- 50% water change right now, using dechlorinated water at the same temperature.
- Add Seachem Prime (double dose) — temporarily neutralises ammonia.
- Stop feeding for 24–48 hours.
- Test again in 4 hours — repeat the water change if the value is still above 0.
- Check the filter (cleaned recently? bacterial colony destroyed?).
Common causes:
- Uncycled tank (see the guide)
- Overstocking or overfeeding
- Filter cleaned with tap water
Is Romanian Tap Water Good for Discus?
Yes, in 80% of cases, for farm-bred discus.
| City/Region | Tap pH | Hardness | Compatibility |
|---|---|---|---|
| Bucharest (Apa Nova) | 7.2–7.6 | Hard (TDS ~350–450) | 🟡 Acceptable (RO blend recommended) |
| Cluj-Napoca | 7.0–7.4 | Medium | ✅ Very good |
| Timișoara | 7.2–7.5 | Medium | ✅ Good |
| Iași | 7.5–7.8 | Hard | 🟡 Acceptable |
| Constanța | 7.5–7.9 | Hard | 🟡 Acceptable |
Essential: always dechlorinate tap water with Seachem Prime or Tetra AquaSafe before adding it to the tank. Chloramine kills your filter bacteria and damages fish gills.
Stability Matters More Than Exact Values
- ✅ pH steady at 7.3 for 2 months → happy discus
- ❌ pH swinging between 6.5 and 7.5 daily → stressed, disease-prone discus
How to maintain stability:
- Regular water changes: 2–3× per week, 20–30%, always at the same temperature.
- Don't add products bought on impulse.
- Don't rearrange the décor frequently.
Weekly Checklist
- ☐ Temperature: 29°C confirmed on the digital thermometer
- ☐ pH: between 6.5–7.5 (note it in a logbook)
- ☐ Ammonia: 0 ppm
- ☐ Nitrite: 0 ppm
- ☐ 20–30% water change done (dechlorinated, correct temperature)
- ☐ Filter running normally (flow rate, noise)
- ☐ Discus swimming actively, eating, colours vivid
If any box is unticked, re-read the relevant section above.
Next Steps
- 📚 Advanced parameters: Ideal Water Parameters — TDS, KH, GH, nitrate.
- 🧮 Water changes: Water Change Calculator — how much and how often.
- 📖 Cycling: Step-by-Step Tank Cycling — without a cycled tank, keeping parameters at 0 is impossible.
Save your tank, log water parameters and get email reminders for care tasks — for free.
Water tests & conditioners
Picked from the shop based on what you just read
Recommendations are selected from the discus.ro shop based on this guide's topic. Availability and prices may vary.
Frequently asked questions
Put what you just read into practice
One account brings together everything you need to keep your tank on track:
Water parameters, inhabitants, photos and the full history of every change — our most used tool.
Water changes, cleaning and feeding, on your own dates.
See at a glance which values fall outside the safe discus range.
The guides, products and listings you follow, saved in one place.



